The Schworak Site | Log In | Up A Level

8. System administration commands (usually only for root)

Enter a Linux command to search for:

FINDMNT

Section: System Administration (8)
Updated: 2024-03-22
Index  |  Return to Main Contents
 

NAME

findmnt - find a filesystem  

SYNOPSIS

findmnt [options]

findmnt [options] device|mountpoint

findmnt [options] [--source] device [--target path|--mountpoint mountpoint]  

DESCRIPTION

findmnt will list all mounted filesystems or search for a filesystem. The findmnt command is able to search in /etc/fstab, /etc/mtab or /proc/self/mountinfo. If device or mountpoint is not given, all filesystems are shown.

The device may be specified by device name, major:minor numbers, filesystem label or UUID, or partition label or UUID. Note that findmnt follows mount(8) behavior where a device name may be interpreted as a mountpoint (and vice versa) if the --target, --mountpoint or --source options are not specified.

The command-line option --target accepts any file or directory and then findmnt displays the filesystem for the given path.

The command prints all mounted filesystems in the tree-like format by default.  

OPTIONS

-A, --all

Disable all built-in filters and print all filesystems.

-a, --ascii

Use ascii characters for tree formatting.

-b, --bytes

Print the SIZE, USED and AVAIL columns in bytes rather than in a human-readable format.

-C, --nocanonicalize

Do not canonicalize paths at all. This option affects the comparing of paths and the evaluation of tags (LABEL, UUID, etc.).

-c, --canonicalize

Canonicalize all printed paths.

-D, --df

Imitate the output of df(1). This option is equivalent to -o SOURCE,FSTYPE,SIZE,USED,AVAIL,USE%,TARGET but excludes all pseudo filesystems. Use --all to print all filesystems.

-d, --direction word

The search direction, either forward or backward.

-e, --evaluate

Convert all tags (LABEL, UUID, PARTUUID or PARTLABEL) to the corresponding device names.

-F, --tab-file path

Search in an alternative file. If used with --fstab, --mtab or --kernel, then it overrides the default paths. If specified more than once, then tree-like output is disabled (see the --list option).

-f, --first-only

Print the first matching filesystem only.

-h, --help

Display help text and exit.

-i, --invert

Invert the sense of matching.

-J, --json

Use JSON output format.

-k, --kernel

Search in /proc/self/mountinfo. The output is in the tree-like format. This is the default. The output contains only mount options maintained by kernel (see also --mtab).

-l, --list

Use the list output format. This output format is automatically enabled if the output is restricted by the -t, -O, -S or -T option and the option --submounts is not used or if more that one source file (the option -F) is specified.

-M, --mountpoint path

Explicitly define the mountpoint file or directory. See also --target.

-m, --mtab

Search in /etc/mtab. The output is in the list format by default (see --tree). The output may include user space mount options.

-N, --task tid

Use alternative namespace /proc/<tid>/mountinfo rather than the default /proc/self/mountinfo. If the option is specified more than once, then tree-like output is disabled (see the --list option). See also the unshare(1) command.

-n, --noheadings

Do not print a header line.

-O, --options list

Limit the set of printed filesystems. More than one option may be specified in a comma-separated list. The -t and -O options are cumulative in effect. It is different from -t in that each option is matched exactly; a leading no at the beginning does not have global meaning. The "no" can used for individual items in the list. The "no" prefix interpretation can be disabled by "+" prefix.

-o, --output list

Define output columns. See the --help output to get a list of the currently supported columns. The TARGET column contains tree formatting if the --list or --raw options are not specified.

The default list of columns may be extended if list is specified in the format +list (e.g., findmnt -o +PROPAGATION).

--output-all

Output almost all available columns. The columns that require --poll are not included.

-P, --pairs

Produce output in the form of key="value" pairs. All potentially unsafe value characters are hex-escaped (\x<code>).

-p, --poll[=list]

Monitor changes in the /proc/self/mountinfo file. Supported actions are: mount, umount, remount and move. More than one action may be specified in a comma-separated list. All actions are monitored by default.

The time for which --poll will block can be restricted with the --timeout or --first-only options.

The standard columns always use the new version of the information from the mountinfo file, except the umount action which is based on the original information cached by findmnt. The poll mode allows using extra columns:

ACTION

mount, umount, move or remount action name; this column is enabled by default

OLD-TARGET

available for umount and move actions

OLD-OPTIONS

available for umount and remount actions

--pseudo

Print only pseudo filesystems.

--shadow

Print only filesystems over-mounted by another filesystem.

-R, --submounts

Print recursively all submounts for the selected filesystems. The restrictions defined by options -t, -O, -S, -T and --direction are not applied to submounts. All submounts are always printed in tree-like order. The option enables the tree-like output format by default. This option has no effect for --mtab or --fstab.

-r, --raw

Use raw output format. All potentially unsafe characters are hex-escaped (\x<code>).

--real

Print only real filesystems.

-S, --source spec

Explicitly define the mount source. Supported specifications are device, maj:min, LABEL=label, UUID=uuid, PARTLABEL=label and PARTUUID=uuid.

-s, --fstab

Search in /etc/fstab. The output is in the list format (see --list).

-T, --target path

Define the mount target. If path is not a mountpoint file or directory, then findmnt checks the path elements in reverse order to get the mountpoint (this feature is supported only when searching in kernel files and unsupported for --fstab). It's recommended to use the option --mountpoint when checks of path elements are unwanted and path is a strictly specified mountpoint.

-t, --types list

Limit the set of printed filesystems. More than one type may be specified in a comma-separated list. The list of filesystem types can be prefixed with no to specify the filesystem types on which no action should be taken. For more details see mount(8).

--tree

Enable tree-like output if possible. The options is silently ignored for tables where is missing child-parent relation (e.g., fstab).

--shadowed

Print only filesystems over-mounted by another filesystem.

-U, --uniq

Ignore filesystems with duplicate mount targets, thus effectively skipping over-mounted mount points.

-u, --notruncate

Do not truncate text in columns. The default is to not truncate the TARGET, SOURCE, UUID, LABEL, PARTUUID, PARTLABEL columns. This option disables text truncation also in all other columns.

-v, --nofsroot

Do not print a [/dir] in the SOURCE column for bind mounts or btrfs subvolumes.

-w, --timeout milliseconds

Specify an upper limit on the time for which --poll will block, in milliseconds.

-x, --verify

Check mount table content. The default is to verify /etc/fstab parsability and usability. It's possible to use this option also with --tab-file. It's possible to specify source (device) or target (mountpoint) to filter mount table. The option --verbose forces findmnt to print more details.

--verbose

Force findmnt to print more information (--verify only for now).

--vfs-all

When used with VFS-OPTIONS column, print all VFS (fs-independent) flags. This option is designed for auditing purposes to list also default VFS kernel mount options which are normally not listed.
 

ENVIRONMENT

LIBMOUNT_FSTAB=<path>

overrides the default location of the fstab file

LIBMOUNT_MTAB=<path>

overrides the default location of the mtab file

LIBMOUNT_DEBUG=all

enables libmount debug output

LIBSMARTCOLS_DEBUG=all

enables libsmartcols debug output

LIBSMARTCOLS_DEBUG_PADDING=on

use visible padding characters.
 

EXAMPLES

findmnt --fstab -t nfs

Prints all NFS filesystems defined in /etc/fstab.

findmnt --fstab /mnt/foo

Prints all /etc/fstab filesystems where the mountpoint directory is /mnt/foo. It also prints bind mounts where /mnt/foo is a source.

findmnt --fstab --target /mnt/foo

Prints all /etc/fstab filesystems where the mountpoint directory is /mnt/foo.

findmnt --fstab --evaluate

Prints all /etc/fstab filesystems and converts LABEL= and UUID= tags to the real device names.

findmnt -n --raw --evaluate --output=target LABEL=/boot

Prints only the mountpoint where the filesystem with label "/boot" is mounted.

findmnt --poll --mountpoint /mnt/foo

Monitors mount, unmount, remount and move on /mnt/foo.

findmnt --poll=umount --first-only --mountpoint /mnt/foo

Waits for /mnt/foo unmount.

findmnt --poll=remount -t ext3 -O ro

Monitors remounts to read-only mode on all ext3 filesystems.
 

AUTHORS

 

SEE ALSO

fstab(5), mount(8)  

REPORTING BUGS

For bug reports, use the issue tracker at <https://github.com/karelzak/util-linux/issues>.  

AVAILABILITY

The findmnt command is part of the util-linux package which can be downloaded from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils/util-linux/>.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
ENVIRONMENT
EXAMPLES
AUTHORS
SEE ALSO
REPORTING BUGS
AVAILABILITY

Return to Main Contents

All content on this site is copyright ©2004-2024 and is not to be reproduced without prior permission.